I did so with machined aluminum spacers and stainless steel fender washers to provide a generous perch for the c-channel.ĭo you know what size unistrut nuts you used? I can't stand the factory Rhino design and would like to do something similar to the ones you are showing. On my first install attempt I had a terrible time getting the channel nuts to stay square in the channels while I started the bolts on them.Īlso I mounted my rack well forward to clear the tailgate ladder so I had to raise it up to clear the roof antenna. One other thing that I did was to swap out the provided channel nuts with ones that have springs on the back (they’re standard M8 by the way). It’s been five months and no evidence of leaking. When I did mine I put down a double layer of tape and injected silicone into the bolt holes. One of my friends recommended this to me after she had to re-do her installation because water got into the headliner of her FJ. One thing I strongly recommend is to go heavy on the butyl tape and waterproofing of the holes. They will compress as you tighten the bolts to secure the backbone rails to the roof. Yes it is okay to perch the backbone rails on top of the plastic bolt sleeves. I'm at a loss as to how this makes sense or how to proceed.but I"m no genius. My apologies for posting on an old thread. Is this how everyone has installed their backbone rails? They sit on top of the white threaded tubes and are tightened down until the tubes are pushed into the roof? I asked if the backbone could be removed without the threaded tubing falling into the headliner and Rhino Rack said, "We have never had to remove a backbone and are unsure if the threaded tubing would be accessible if the backbone was ever removed." I had assumed the white tubes would fit into the mounting holes of the backbone, but they do not.Īccording to Rhino Rack, the backbone sits on the threaded tubes and the white threaded tubing will be pushed into the roof of the 4runner when the backbone is tightened down. Other compression algorithms are not supported.Trying to install the Rhino Rack Backbone on my '16 trail and found the mounting holes in the backbone are smaller than the white plastic threaded tubing that they mount to on the 4runner. rhp files themselves are inspected to determine for which versions of Rhino they will be installed. Related topicsįolder names are not important the. These files will end up inside your plugin directory The Rhino Installer Engine cannot be used to install files to other parts of the hard drive. rhi file into a directory specific to your plugin, you can include anything you want: help files, documentation, etc. Note that all three versions of the plugin can have the same name, so long as they are in different folders.Īdd all the files inside the “installer image” folder to a new ZIP 2 archiveīecause the Rhino Plugin Installer Engine unzips your. Marmoset/Ĭopy the appropriate files into the folders 1. This folder will contain only the files you want to install on the user’s system. In this example, the folder is the name of the product – Marmoset. The current third-generation iPhone SE is Apples smallest device, modeled after the iPhone 8. When installing Rhino, select Use LAN Zoo and then specify the name of your Zoo. During restart, select Use LAN Zoo and then specify the name of your Zoo server. Select your Rhino license and click Convert.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |